Subject | Text |
STR-DE598 no display from using wrong speaker (dead) | hi , new to the forum but hope som1 can help , got this str-de598 from a friend who clams to have pl |
| Still plugging away...
Re-read earlier posts and saw the fuse is supposed to be 500ma not 400, so |
|
Nd Svc Manuals - Fluke 8060A, Pana-KX-P4430laser | I looked here far and wide and have not found the manuals.
The KX-P 4430 is similar to several m |
Sony KP53S25 | It was a neon lamp instead of a cap. I figured out it was going into protect mode, the fault was ma |
| do you have any volt meter ??? |
| It sounds like some filter capacitors have dried out and need replacing. The blown fuse means there |
Bush DVD1005 - resistor burned | I currently have a Bush DVD player, model DVD1005, which does not work. On investigation, a resistor |
Pioneer VSx-5900S | I do not get anything on FM or AM but the Vu meter shows a received signal as they fluxuate on left |
Re: Why model or chassis number is required! | [quote:6df2498d7e="jts1957"]c14147 1.5uf@100v[/quote:6df2498d7e]
Ummmmmmm........not sure what t |
| Not even a late-comer? Good god this place is a ghost town.
All the capacitors in the area check |
| [quote:18a63d2739="jts1957"]I put a new diode in D31 and everything connected. [color=red:18a63d2739 |
| Maybe you could sell your daughters and buy a big screen? LOL
Sorry:)
I am not familiar with y |
| Not quite sure of the question, but here's the info;
In general, it is prefered to have an ESR me |
minolta 1054 | it is verry important to run F8. and to settings C7 on 1, C5 on 2, and in location 4 (meter count-st |
| hope you discharged the smoother cap b4 you started arsing about. take it to a professional as the a |
Varying degrees of electronic knowledge | I've Noticed That Users of the site have varying degrees of electronic knowledge it would be helpful |
| I wish it were that simple, but with monolithic capacitors I have found that they can read their cor |
|
Re: the best procedure to check ultra fast diode by analogme | [quote:92cd8e0d7a="newone"]the best procedure to check ultra fast diode by analogmeter
what is t |
Calibration of PM6303 LCR Meter (non-A) ... | Bump no longer needed! Many thanks to Fluke Europe Netherlands BV, they sent me this section of manu |
TV | Suspect overload from Line stage or no HT output from power supply.
You'll need a circuit, meter an |
NationalVCR NVG7A Service manual & circuit and data shee | I desparately need to find the circuit ,data sheets and any service manual for this trusty old warri |
Tape dack made by technics RS-TR373 does not play sound | Hi,
Please advice if any one knows what is wrong and why it make no sound and no signal is on the l |
| You can check (Q1 thru Q4) between each output transistor leg and ground for shorts.
You could pu |
To (maybe) clarify what LJ told you | All this assumes you have some means of measuring resistance and voltage. How much experience desold |
| You'd probably get a better response if you gave us a little clue!
Does the unit work at all or i |
Continuing onward ... | First I'll make the assumption that this speaker system has worked successfully with THIS computer i |
| It is not easy. A capacitor usually makes your meter needle move up, then slowly down as it charges |
Sony TV just quit | 27" Sony Trinitron TV just quit. It will not turn on by the remote or on set button. Have confirmed |
| Not really. If you have a digital multi meter check the hotizontal output transistor to see if it's |
Re: Faulty UPS APC 650Va | [quote:276f2deb8a="guest"]I Have 1 UPS APC 650Va. The UPS was working fine but it has now developed |